Full site survey
A map of every network and access point in range, with its encryption, reach, and how far it leaks past your walls.
The Problem
Your Wi-Fi Reaches Further Than Your Walls Do
Wireless does not stop at the front door. It spills into the parking lot, the floor above, and the street, where anyone with a laptop can listen in and try the locks.
Weak keys
An old password protects a network your scanners still use.
Weak keys
We capture the handshake and show how fast it falls.
Evil twin
A lookalike network tricks a laptop into handing over logins.
Evil twin
We run that attack safely and show which devices join.
Rogue AP
A repeater or hotspot nobody tracks opens a side door.
Rogue AP
We hunt down rogue and forgotten access points on site.
Flat guest
Guest Wi-Fi reaches systems it should be kept away from.
Flat guest
We test whether guest traffic truly stays walled off.
Your Wi-Fi works, so nobody thinks about it. Then you realize the guest and office networks share one box. The warehouse scanners still use an old password, and someone set up a repeater last year that no one tracks. An attacker does not need to get inside. They sit in the car park, capture a handshake, and work on the password offline. Or they stand up a lookalike network, and a staff laptop joins it and hands over credentials. Your firewall does not see any of it, because the attack happens in the air, outside the building.
We test your wireless the way someone in the car park would. We survey every network and access point we can reach, capture and attempt the handshakes, and check how your Wi-Fi handles a lookalike network aimed at your staff. We hunt for rogue and forgotten access points, and we test whether your guest Wi-Fi really stays walled off from the systems that matter. You get proof of each weakness, a severity rating, and the fix, so you close the gaps that let an outsider in.
Tested from outside in
We start where an attacker sits, outside your walls, and work inward through every network we can reach.
Rogue device hunt
We find the repeaters, hotspots, and forgotten access points that open a side door into your network.
Guest isolation proven
We test whether your guest Wi-Fi really stays away from staff systems, instead of trusting the setting.
Our Wireless Penetration Testing Process
From Site Survey to a Ranked Fix List in Five Steps
You approve the sites and rules, and we survey and test every network on site or with a shipped kit. You get proof of each weakness, a ranked fix list, and a retest.
You tell us your sites, how many access points, and which networks matter: office, guest, warehouse, or building controls. We agree the test window and how we reach the site, on site or with a remote kit. You sign a written authorization and get a fixed scope and price.
What's Included
What You Get With Wi-Fi Penetration Testing
You get a full site survey, handshake and evil-twin testing, a rogue device hunt, guest isolation checks, proof for every finding, and one retest.
Compare Options
DeveloperLook vs an In-House Scan vs a Large Firm
An in-house scan with a free tool is cheap, and a large firm carries brand weight for a tender. Here is where each fits a wireless test and where it stops.
| Feature | DeveloperLookBest fit | In-house scan | Large firm |
|---|---|---|---|
| Starting cost | From $950 | Staff time only | Quoted per engagement |
| Site survey | Every network in range | Your own APs only | |
| Handshake testing | Captured and attempted | Rarely attempted | |
| Evil-twin test | Run safely on staff | Not run | Sometimes run |
| Rogue AP hunt | On-site sweep | Mostly guesswork | On-site sweep |
| Guest isolation | Tested directly | Assumed, not tested | Usually checked |
| Retest | Rescan anytime | Varies by contract | |
| Best for | Offices and campuses | A rough first look | Regulated tenders |
DeveloperLook
In-house scan
- Starting cost
- DeveloperLook: From $950In-house scan: Staff time only
- Site survey
- DeveloperLook: Every network in rangeIn-house scan: Your own APs only
- Handshake testing
- DeveloperLook: Captured and attemptedIn-house scan: Rarely attempted
- Evil-twin test
- DeveloperLook: Run safely on staffIn-house scan: Not run
- Rogue AP hunt
- DeveloperLook: On-site sweepIn-house scan: Mostly guesswork
- Guest isolation
- DeveloperLook: Tested directlyIn-house scan: Assumed, not tested
- Retest
- DeveloperLook: In-house scan: Rescan anytime
- Best for
- DeveloperLook: Offices and campusesIn-house scan: A rough first look
Projects We've Built
Multi-Site and Campus Projects We Have Built
We build and run the sites and systems that offices, gyms, hotels, and job sites rely on, so we know how their networks and devices connect.
Herile IT Agency Web Design & Development
- Agency
- Website
StriveGym Membership Website Design & Development
- Fitness & Gym
- Membership Platform
- Website
Huantume Construction Website Design
- Construction
- Website
Seasons Heritage Vacation Rental Website Design
- Vacation Rental
- Booking System
- Dashboard
What Our Clients Say
What Clients Say After Launch
Feedback from teams we have built and supported networked, multi-site systems for.
We had a pretty specific idea of what we wanted our website to become, but I wasn’t sure how easily we could explain all of it to a development team. There were quite a few moving parts, and we were working toward a deadline, so I expected a few things to get lost along the way. That never really happened. They understood what we were trying to achieve, kept us updated throughout the process, and got everything ready within the agreed timeline. The final site feels much easier to navigate, works beautifully on mobile, and is noticeably smoother for our customers. It was a huge relief seeing the original idea actually turn into the website we had in mind.
The mobile experience is probably my favourite part of the new site. We had spent a lot of time making sure the desktop version looked right, and the team kept pushing us to think about how everything would actually feel on a phone too. They were right. The navigation is clean, the interactions feel natural, and everything we’ve tested so far works exactly as it should. They also went through the links, forms, integrations, and other details more than once before launch, which I really appreciated. And even after going live, we could still reach out when something came up. The whole process felt friendly, organised, and surprisingly straightforward.
What I appreciate most is that the website is actually easy for us to manage now. We can update content ourselves instead of sending a developer a message every time we need to change something small. They also paid attention to the technical SEO side, which mattered to us because we didn’t want a new website to create problems for the traffic we already had. I’ve probably asked more questions than I should have since launch, but every question has been handled patiently and without any fuss. The team is easy to work with, they explain things clearly, and when we need something changed, they focus on getting it done rather than making the process complicated.
1,250+
Projects shipped
10+
Years of experience
Top 3%
Upwork Top Rated Plus
5 stars
Average review score
1,250+
Projects shipped
10+
Years of experience
Top 3%
Upwork Top Rated Plus
5 stars
Average review score
Want results like these?
Tell us what you are building. You get a reply within 24 hours on business days, then a written estimate.
Work Culture
Why IT Teams Trust Us With a Wireless Test
A wireless test runs near your staff and live networks, so how we work matters as much as what we find. These habits keep the test safe and useful.
Authorized and in scope
We test only networks you own or are authorized to test, under written rules of engagement. The sites, window, and method are agreed in writing first.
We test from the attacker's seat
We start where a real attacker sits, outside your walls, so you learn what someone in the car park can actually reach, not just what your dashboard shows.
We stay blame-free on people
An evil-twin test shows which devices trust a fake network, not which person to blame. We report by device and setting, so you fix the system.
We respect your airspace
We avoid knocking real users off the network and flag anything fragile instead. Disruptive checks run in an agreed window, off business hours if you ask.
We flag an easy fix
If your Wi-Fi is modern and segmented and a config review would do, we will tell you before we quote. A full test should earn its cost.
You own the report
The report, the proofs, and the fix list are yours to keep and share with an auditor, an insurer, or a customer, during and after the engagement.
Overview
What do wireless penetration testing services include?
DeveloperLook provides wireless penetration testing services for offices, warehouses, and campuses. We survey every network in range, test handshakes and lookalike networks, hunt rogue access points, and check whether guest Wi-Fi stays isolated. Tests start at $950, take 1 to 2 weeks, and you get proof for each finding, a ranked fix order, and a retest.
DEVELOPERLOOK
Project facts · Wireless Penetration Testing Services
- Service
- Hands-on Wi-Fi pen test with a site survey, rogue hunt, and retest
- Typical timeline
- 1 week for one site, 2 to 3 weeks for multiple sites or campuses
- Networks tested
- WPA2, WPA3, guest and captive portals, and IoT Wi-Fi
- Built with
- Aircrack-ng, Kismet, a Wi-Fi test kit, and manual testing
- Experience
- 10+ years of development experience and 1,250+ shipped projects
- Post-launch support
- 30 days of support after the report
- Communication
- Calls in US, UK, and AU business hours
- Starting price
- From $950 USD, fixed scope after a free scoping call
Reviewed 27 Oct 2026 by Saimul Islam
Good fit
Offices with mixed networks
You run staff, guest, and device networks off a few access points, and you are not sure the guest Wi-Fi really stays away from your systems.
Warehouses and job sites
Your scanners, cameras, and controls run on Wi-Fi that was set up years ago, and you want to know whether an old password still protects them.
Multi-site businesses and chains
You run offices, clinics, or gyms across several locations, and you want each site's wireless tested, not just the headquarters.
Teams after a scare
You spotted an unknown network or device, and you want a sweep that finds rogue access points and proves what they could reach.
Teams facing a questionnaire
Your customer, insurer, or auditor asked for a recent wireless penetration test, and you need real proof and a report, not a config export.
Not a fit
Wired network focus
Your worry is the wired network, servers, and firewalls, not Wi-Fi. Our Network Penetration Testing page targets that surface directly.
Hardening, not testing
You already know the gaps and want the wireless hardened and segmented. Our Network Security Services page covers that work.
Fully remote team
Your staff work from home with no office network to test, so a wireless test has little to cover. A web app or endpoint test may fit better.
Budget under $950
Your budget is under $950, or you have one simple access point. A quick config review is a cheaper first step than a full test.
Not sure we're the right fit?
Book a free call or message us. We'll tell you honestly whether we're the right team.
Pricing
Transparent Starting Prices for Wireless Penetration Testing
These are starting points in USD. Your price depends on how many sites and access points are in scope and whether we test on site or with a shipped kit. You get a fixed proposal after a free scoping call.
For Agencies
White-Label Wireless Penetration Testing for Agencies and MSPs
You own the client relationship. We supply the wireless testing under your brand: a site survey, handshake and rogue testing, guest isolation checks, and a report your account team can present. One partner for the testing, so your MSP can offer Wi-Fi tests without buying kit or training a specialist.
How the partnership works
White label: your client only ever sees your brand
Your clientSees only your brand
You, the agencyOwn the relationship
DeveloperLookBehind your brand
Share the client
You give us the sites, the scope, and the rules of engagement.
- Client needs
- You share the details
- Details received
We test and prove
We survey, test, and hunt rogue devices, then prove each finding.
- Scope and plan
- Proposal to resell
- Your quoteYOUR LOGO
You present results
You deliver the report and fix order under your own brand.
- Done by our team
- Your brand on it
- Handed to your clientDone
- Your client
- You, the agency
- DeveloperLook
Share the client
You give us the sites, the scope, and the rules of engagement.
- Client needs
- You share the details
- Details received
We test and prove
We survey, test, and hunt rogue devices, then prove each finding.
- Scope and plan
- Proposal to resell
- Your quoteYOUR LOGO
You present results
You deliver the report and fix order under your own brand.
- Done by our team
- Your brand on it
- Handed to your clientDone
Partner with DeveloperLookDelivered under your brand
The Right Technology for Your Project
Technology Stack
We test with the tools wireless testers trust and a portable kit, then report in formats your engineers can act on.
- Aircrack-ng
- Kismet
- Wireshark
- hashcat
Python
- WPA2
- WPA3
- 802.1X
- RADIUS
- Cisco
- Ubiquiti UniFi
- Aruba
- Fortinet
- Microsoft Word
Google Sheets
Loom- PDF report
01 / 04
Related Services
Services buyers often add: the pen test hub, wired network testing, network hardening, and a managed vulnerability program.
Web Application Penetration Testing Services
DeveloperLook offers Web Application Penetration Testing Services for stores, SaaS products, and custom apps: hands-on testing of logins, roles, checkout logic, APIs, and cloud settings, with proof for each finding, a fix list, and a retest.
Network Penetration Testing Services
DeveloperLook provides network penetration testing services for offices, data centers, and cloud networks. We test every exposed service from outside, then from an assumed breach inside, and prove how far an attacker could reach.
Network Security Services
DeveloperLook delivers network security services for offices, clinics, and shops. We map every device, split the network into zones, clean up firewall rules, lock down admin access, and secure Wi-Fi and VPN on the hardware you already own.This page
Wireless Penetration Testing Services
Pairs with the 6 services around it
Vulnerability Assessment Services
DeveloperLook runs vulnerability assessment services for growing businesses and IT teams. We scan public assets, internal networks, cloud accounts, and web apps, confirm every finding by hand, and deliver a vulnerability assessment report ranked by real risk.
Penetration Testing as a Service
DeveloperLook runs penetration testing as a service for product teams on a monthly rhythm. Each cycle is scoped from what you shipped, tested by hand, and filed as tickets in your own tools, with a quarterly report for customers and auditors.
Cybersecurity Services
DeveloperLook provides cybersecurity services for businesses without a security team. We assess identity, email, devices, cloud, and web apps, fix the gaps you approve, and recheck every fix, so you get a cybersecurity service provider that does the work.FAQ
Frequently Asked Questions
Straight answers on cost, timeline, what a wireless test covers, and how we reach your site.
Saimul IslamFounder & CEO, DeveloperLookStill have questions?
Send a message or book a call with the team.
Wireless penetration testing services start at $950 for one site with up to 10 access points. A larger site with a rogue sweep and segmentation testing runs $2,400, and a multi-site or campus test starts at $4,600. You get a fixed quote after a free scoping call that sets the site count and whether we test on site or with a shipped kit.
One site usually takes about a week end to end, with the survey and testing in the middle. Several sites or a campus take 2 to 3 weeks. How long depends on the number of access points and sites in scope. We retest once your team has applied the fixes, usually within 30 days.
Wireless penetration testing, also called wireless pentesting or wireless pen testing, is an authorized attack on your Wi-Fi and the devices on it. A tester works from where an attacker would sit, outside your walls, to see which networks, passwords, and access points they could use. It covers handshake capture, lookalike networks, rogue device hunting, and whether your guest network stays isolated.
Wi-Fi pentesting, sometimes written WiFi penetration testing or wireless security penetration testing, is a hands-on test of your wireless networks, not an automated scan. A scan lists the networks it sees. A tester captures handshakes, stands up a lookalike network, and hunts for rogue access points. The result is evidence of real weaknesses, not a list of signals in range.
The first step is a site survey. Before any attack, we map every network and access point in range, including ones not on your list. We record each one's encryption, signal reach, and how far it leaks past your walls. That footprint tells us where to test and often surfaces a rogue or forgotten access point on its own.
We survey the site, then test by hand. We capture and attempt handshakes offline, stand up a lookalike network to see which devices trust it, and sweep for rogue access points. We test whether guest Wi-Fi stays isolated, then prove each finding and rank it by impact. This wireless network security testing runs on site or with a kit we ship you.
Often, yes. For a single site we can ship a small test kit you plug in, which lets us test remotely as if we were on site. Larger campuses, a rogue device hunt, or a full physical sweep usually need a tester on site. We agree the method at scoping, so you know up front whether we travel or send a kit.
Yes. We test WPA2 and WPA3 networks, personal and enterprise. On WPA2 we capture and attempt handshakes offline and check for reused keys. On WPA3 we check for downgrade paths, misconfiguration, and management-frame protection. We also test 802.1X and RADIUS setups, captive portals, and the default credentials on the access points themselves.
We plan it not to. We avoid tests that knock real users off the network and flag fragile gear instead of hitting it. Anything disruptive runs in an agreed window, off business hours if you ask. An evil-twin test targets devices we control or agree on, so your staff keep working while we test.
You do. The report, the reproducible proofs, and the fix list are yours to keep. You can share them with an auditor, an insurer, or a customer, during and after the engagement. You also get a summary letter you can send to a customer or insurer who asked for proof that the test was done.
Saimul IslamFounder & CEO, DeveloperLookStill have questions?
Send a message or book a call with the team.
Free 30-min callGoogle Meet
Book a call
Book a free 30-minute call
In 30 minutes on Google Meet we walk you through how we would build it, how long it takes and what it costs. Then you get a written estimate.
Calendar not showing? Book on cal.com or send a brief.